Nicolas Charbonnier (Charbax) interviews Justin Zhao, Software Architect at Hisilicon, and Rob Savoye of Linaro’s Toolchain Group
Hisilicon engineer Justin Zhao, Software Architect at Hisilicon SoC architecture department, is bringing up the Linux software on the Hisilicon D02 Board, one of the most powerful ARM Processors in the world. They have a configuration with 32-core Cortex A57 @ max 2.1GHz and up to 2 SoC per board coming up within a few months (64-cores per board!), each SoC has 1MB L2 cache/cluser, 32MB L3 cache. The board has 12 SATA\SAS (8 for one SoC, 4 for the other), 2 10/100/1000Mb/s compatible Ethernet ports, 2 10Gb/s SFP+ Ethernet ports, 8 DDR3 RAM DIMMs, 4 PCIE solts (2 pieces/SoC), 2 UARTs & 2 JTAGs for debug, 1 USB host. Rob Savoye of Linaro’s Toolchain Group joins in this video discussing the installation of the latest GCC to this Board. Justin Zhao shows how he can bootup from Sata, PXE, Provision mode, NFS, with OpenSuse 13.1, Ubuntu 14.04, working on Red Hat. A LAMP (LAVA) and lxc (container) have already been enabled, and some Benchmarks (e.g. perf, iperf, ltp) have been executed on it too, perhaps Hisilicon will soon publish the test results also.